Digital Flexible Cable Flexing Test Equipment With 2 Pulley As Per IEC60227 UL1581

Application
The Flexible Cable Flexing Test Equipment is used to detect the damage degree of flexible cables with rubber insulation and sheath after bending for a certain number of times under the dynamic load.

Reference standards:
GB/T5023 2-2008 Section 3.1;
GB5013.2-2008 Section 3.1;
IEC60227-2:2003;
IEC 60245-2:2003
UL 1581 etc.

Main Specifications:

1. Test station: 1 in total, measuring one sample each time.
2. Winding mode: two pulleys.
3. Bending speed: 0.33 M / s.
4. Bending stroke: ≥ 1m.
5. Test current: 0 ~ 35A adjustable.
6. Test voltage: two core single-phase AC: 0 ~ 230V (adjustable), three-core three-phase AC: 0 ~ 400V (adjustable) 50Hz.
7. Test objects: it can detect single-phase, three-phase three wire and three-phase four wire.
8. Heavy hammer: 1.0kg, 1.5kg, 2.0kg, 2.5kg, 3.0kg, 3.5kg, 4.0KG, 5.0kg, 6.0kg, 7.0kg, 7.5kg and 9.0kg,two pieces for each.
9. Pulley diameter: two pulleys ¢ 80, ¢ 120, ¢ 160 and ¢ 200 (mm),two pieces for each.
10. Fault detection and shutdown: when the actual test sample conductor is open circuit, short circuit between conductors, short circuit between cable sample and pulley, and has the functions of wire break indication, phase to phase short circuit indication, wire core and shell short circuit indication.
11. Power requirements: AC380 (± 10%) V / 50Hz.

Equipment structure

1. The control panel is located in the front of the machine to facilitate observation and operation, and the power supply is located at the back of the machine.
2. The driving structure is concealed, with a neat and beautiful overall appearance and easy cleaning.
3. The pulley device is located above the machine. The pulley is a nut locking structure, which is convenient for users to replace the pulley and test different samples.
4. Four universal casters with lock are installed at the bottom of the chassis to facilitate movement. During the test, pressing the caster lock can fix the machine without moving.

Components, materials and functions:

1. Overall dimension of Flexible Cable Flexing Tester: 1880 * w530 * h1500 (mm).
2. Material of outer box: the shell is made of high-quality (t = 1.2mm) electrostatic steel plate and processed by CNC machine tool. The arc shape is beautiful and generous. The surface of the shell is sprayed with plastic, which is more smooth and beautiful.
3. Pulley material: high quality aluminum, surface polishing.
4. Weight material: 45# surface thickening and electroplating treatment.

Mechanical drive system:

1. The Flexible Cable Flexing Test Equipment adopts Taiwan DC reduction motor + sprocket chain structure.
2. The relay control system is adopted, and all electronic components are domestic leading brands, which can better ensure the performance and detection accuracy of the machine.
3. The Flexing test equipment has the following safety protection devices: power overload, short circuit protection and control circuit overload protection.

Environmental service conditions:

1. The ground is flat, well ventilated and free of flammable, explosive and corrosive gases and dust.
2. There is no strong electromagnetic radiation source nearby.
3. Ground bearing capacity: not less than 200kg / m2.
4. Appropriate maintenance space shall be reserved around the equipment.
5. Temperature: 5 ºC ~ 30 ºC.
6. Air pressure: 86 ~ 106kpa.
7. AC380V/50HZ.
8. Allowable voltage fluctuation range: 380V ± 10%.
9. Allowable frequency fluctuation range: 50Hz ± 1%.
10. The user is required to configure the power switch with corresponding capacity for the equipment at the installation site, and the switch must be independent and specially used for the equipment.
11. When the Flexible Cable Flexing Test Equipment is not working, the ambient temperature shall be kept within + 0 ~ 45 ºC.