Advanced Instruments Co.,Limited
To Be Advanced in Quality and Service!
| Place of Origin: | China Mainland |
|---|---|
| Brand Name: | AI |
| Certification: | ISO9001 |
| Model Number: | WFT |
| Minimum Order Quantity: | 1 Set BS 8414-1 Fire Test Equipment |
| Price: | Negotiable |
| Packaging Details: | BS 8414-1 Fire Performance Testing Equipment packed in plywood case |
| Delivery Time: | 2 or 3 months |
| Payment Terms: | Western Union, , T/T, L/C |
| Supply Ability: | 20 sets per month |
| Test Standard: | BS 8414-1 Fire Performance Of External Cladding Systems | Test Object: | Non-loadbearing External Cladding Systems Applied To The Face Of A Building |
|---|---|---|---|
| Application: | Building Material | Height Of External Wall: | 9 Meter |
| Wind Speed Sensor: | 0-10M/S | Power Supply: | 220V, 50HZ, 5A |
| Color: | White | Warranty: | One Year |
| Highlight: | Fire Performance Testing Equipment,BS 8414-1,BS 8414-1 test equipment |
||
Product introduction
The window fire test model simulates a vertical building surface consisting of a main wall and a vertical auxiliary wall.
The external thermal insulation system is installed on the building surface. The opening of the combustion chamber at the bottom of the test model simulates the windows or openings of the floor in the actual building. The ignited wood or gas flame overflows from the window to simulate the fire after ignition in the room. When a flame overflows from a window or hole, it attacks the external thermal insulation system, checks the damage degree of the external thermal insulation system, and judges its flame propagation. The total heat released in 30 minutes is about 4500 MJ, and the peak heat release rate is about (3 + 0.5) MW.
Standard :
Performance characteristics
1. The fire performance test system provides the ignition alarm after 5 minutes. When ignited, the test start time can be automatically determined. At the same time, the test overtemperature can be automatically distinguished. At the same time, the computer can display combustion test by visual frequency. At the same time, computer software can record dropping time, collapse time, temperature value and display temperature curve and other test related information.
2. The fire test equipment has one wind speed sensor, 0-10M/S, with an accuracy of 0.1M/S;
3. Two cameras, including a computer display device 2.
4. K-type thermocouple: with stainless steel sheath, the temperature range is 0-1038 degrees, the temperature accuracy is (+0.1%) and the thermocouple wire is 500 feet.
5. ADAM-4118 Module: Strong 8-way Thermocouple Input module, 8-way independently configurable differential channel; Wide temperature operation; Wider operating temperature: -40-+85 degrees C; High noise resistance: 1KV surge protection voltage input, 3KV EFT and 8KV ESD protection; Strong anti-interference: 1KV surge protection at power input, 3KV EFT, 8KV ESD protection, wide. Power input range: +10~+48 VDC; input range: +10~+48 VDC;
6. This fire performance test system is supplied with two computers;
7. The fire characteristics test equipment has three electronic control boxes;
8. One signal conversion box;
9. Field wiring.
Installation Requirements:
| 1 | Model | WFT |
| 2 | Product Name | BS 8414-1 Fire Performance Testing Equipment |
| 3 | Electrical requirements | 220V, 50HZ, 5A |
| 4 | Environmental requirements | temperature from 10°C to 35°;humidity (65 ± 5) % |
| 5 | Height of external wall | 9 meter |
| 6 | Application | Building Materisl |
Facotry Overview