Single or Three Phase Automatic Transformer Turns Ratio Meter TTR Meter

Single Three Phase Transformer Turns Ratio Tester TTR Meter

I. Introduction:

This Automatic Transformer Turns Ratio Meter applied to measure the voltage ratio of three or single phase transformer. All the data and test results are showed on a 320*240 LCD. All the test results could be printed by the micro printer or saved on the storage of the tester. The tester has a good performance on auto protection and anti-disturb.

II. Features

1. The voltage ratio measurement of three or singe phase transformer

2. The group vector measurement of three phase transformer.

3. The polarity measurement of single phase transformer or CT/PT

(CT that knee-point voltage should be more than 80V)

4. Voltage ratio error calculation

5. Voltage ratio range calculation of three phase transformer

6. Current transformer ratio measurement

7. Excitation current measurement in ratio testing

8. Reproduce the AC test voltage from power source to reduce the effects of bad power source

9. Save the test results in the memory internal the tester

10. Print the test results by micro printer

11. Reverse connection detection unit to prevent high pressure injection operation

12. Over current protection in test voltage

13. Upload the test results to make word report by RS232 interface

III.Technical specifications

1. Ratio measurement range:1—10000

2. Group measurement:1—12

3. Phase measurement error:1 degree

4. Ratio measurement error:1—1000 ± 0.2% 1000—10000 ± 0.5%

5. Power supply: AC220V ± 10%, 50Hz

6. Size : 400*350*200 mm3 Weight : 7kg