Measure Properties Of Floorings In Response To Heat And Flame
220V, 50Hz Or As Requested
1900mm (W) X 750mm X (H) X 2120mm (D)
Flooring Radiant Panel Tester
This Flooring Radiant Panel Tester is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system.
The test measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an adjacent room or corridor.
This Flooring Radiant Panel Tester an also be used for tests to standards ASTM E648 and DIN 4102; Part 14.
The resulting test chamber is insulated with calcium silicate insulation board and is provided with a temperature resistant observation window.
The stainless steel sample support assembly is mounted on a sliding platform to allow safe and easy loading of the test sample.
The radiant heat is applied by means of a gas-fuelled panel, inclined at 30º, and directed at a horizontally mounted floor covering system specimen.
The radiant panel generates a radiant energy flux distribution ranging from a nominal maximum of 10.9 kW/m2 to a minimum of 1.1 kW/m2.
Dummy calibration specimen with holder, calibrated heat flux meter and mounting on the Flooring Radiant Panel Tester .
The distance burned until flame-out is reached and converted, by calibration, into an equivalent critical radiant flux, in kW/m2.